1. Getting started & connections
Overview, connecting HDMI/power/RS232/audio cables, the LOGO status LED, HPD reset and factory reset, and the backside sticker.
Read chapter 1 →HDfury Integral 2 manual, online
The complete Integral 2 user manual (Rev 2.33), converted by us into readable web chapters so you can search it, link to it and read it on any device — or download the original PDF below. Setting names, commands and menu texts are kept exactly as they appear on the unit and in the GUI.
Table of contents
2. Buttons, switches & presets
EDID mode selection, INFO control, input switching and Matrix mode, HDCP settings, scaler settings and the 10 TOP-port scaling presets.
Read chapter 2 →3. EDID modes & the 100 tables
Automix flags and algorithms, Custom and Fixed EDID, and the complete verbatim list of all 100 preloaded EDID tables.
Read chapter 3 →4. Firmware update & drivers
Choosing the right Silabs driver for your Windows version, flashing FPGA and MCU step by step, and USBBOOT recovery.
Read chapter 4 →5. The Windows USB GUI
Every GUI tab explained: EDID Manager, Scaler, HDR and AVI/VSI infoframes, Dolby Vision capture, OSD, CEC Commander, JVC macros and Config.
Read chapter 5 →6. RS232, IR codes & the app
The full RS232 command reference (V1.13 MCU), every IR code with its NEC code, and the Total Control APP with GoBlue.
Read chapter 6 →7. Pro tips
Official HDfury tips: Dolby Vision through in-between equipment, GUI DPI scaling, AVI infoframe examples, ARC/Atmos cabling and more.
Read chapter 7 →Also from the manual
The manual's FAQ section lives on our FAQ page, and its specifications section on the specifications page.
All downloads →
Quick orientation
Three slide switches (EDID, SCALE, HDCP — middle position always means “controlled via GUI/app/RS232/IR”), two push buttons (RESET and INFO), 2x HDMI in, 2x HDMI out, a combo 3.5mm audio output, RS232, IR and mini-USB for power and firmware updates. The backside sticker summarises all switch positions — and so does chapter 1.
Start reading →